Archive for April 2011

Spotlight on RKV4G35D-F24 AR (Annovi Reverberi) Pump   Leave a comment


Spotlight on RKV4G35D-F24 AR (Annovi Reverberi) Pump

RKV4G35D-F24 AR (Annovi Reverberi) Pump 4 GPM @ 3500 PSI, 1″ Hollow Shaft – great for most 6 to 9 hp engines with a straight shaft.

MANIFOLD: High strength forged brass or nickel plated for long term use.
BOLTS: Eight 8mm grade 8.8.
PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience.
CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
BEARINGS: Oversized tapered roller bearing for maximum
life and load distribution.
BEARINGS SUPPORTS: Precision die-cast and machined to assure concentricity and alignment.
VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide long life and positive seating.
SEALS AND V-PACKINGS: Continuously lubricating for extended life.
PLUNGER RODS: Stainless steel construction for strength, no plating to scrape off, back-up and o-ring plunger sealing system.
CONNECTING RODS: One piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength

PRODUCT DATA SHEET FOR RKV4G35D-F24 AR (Annovi Reverberi) Pump.

List Price: $683.52
Our Price: $420.77
You save $262.75!

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Before you buy a New Pressure Washer from Home Depot or Lowe’s…Think about Replacing your pump!   Leave a comment


Spotlight on Pressure Washer Pumps and Accessories

Before you buy a New Pressure Washer from Home Depot or Lowe’s. Check out about Replacing your pump!

Shopetsonline has 1000’s of pumps for all types of pressurewasher:

ANNOVI REVERBERI CAT PUMPS
COMET PUMPS GENERAL PUMP
GIANT PUMP HYPRO
MI-T-M BOLT-N-GO PUMP SPECIALS
UNICO PUMPS

So if that pressure washer you purchased from Lowes or Home Depot stops working, Check us out first to see if our staff can help you get it back in working order with out having to purchase a whole new unit for the big box stores like lowe’s or home depot.

Pressure Washer Pumps and Accessories

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Spotlight on TAGINATOR® World’s Best Graffiti Remover   Leave a comment


Spotlight on TAGINATOR® World’s Best Graffiti Remover
Use on MASONRY Surfaces
Taginator Graffiti Remover
Taginator Graffiti RemoverShop for taginator and tagaway graffiti removal products now
Taginator Graffiti Remover
BIODEGRADABLE GRAFFITI REMOVER for MASONRY!

Spray onto MASONRY…. Rinse

TAGINATOR® World’s Best Graffiti Remover sprayable liquid quickly dissolves graffiti. TAGINATOR® Graffiti Remover has a pleasant fresh and clean scent. TAGINATOR® Graffiti Remover soaks through graffiti into masonry surfaces. Deep rinse additive allows graffiti to be easily pressure rinsed out of masonry pores. TAGINATOR® Graffiti Remover will easily remove multi-layered graffiti or graffiti that has been painted over! TAGINATOR® Graffiti Remover is so effective the need to pre-coat masonry with sacrificial or permanent coatings is not necessary. TAGINATOR® Graffiti Remover is non-flammable and V.O.C. compliant.
Works on:
Removes:
Preferred by:
● Brick ● Cinder Block ● Slate ●Marble ● Granite ● Stucco

● Terra Cotta ● and many other surfaces!

● Spray Paint ● Latex Paint● Enamel Paint ● Lacquer!

●Public Works ● Housing Authority● Parks/Forests ● Highways & Mass Transit ● School Systems

Taginator® Graffiti Removal Steps
Taginator Graffiti Remover
Taginator Graffiti Remover
1. Spray TAGINATOR® graffiti removeronto graffiti using

TAGSPRAYER™.

2. Let TAGINATOR® graffiti removersoak into masonry

for 5 – 20 minutes.

3. High pressurerinse away.

TAGINATOR® World’s Best Graffiti Remover

Taginator EMPTY quart spray bottle, cap & trigger TAGINATOR Graffiti Remover 32 oz
List Price: $5.25Our Price: $3.23

You save $2.02!

List Price: $17.64Our Price: $17.64
TAGINATOR Graffiti Remover 1 GAL. TAGINATOR Graffiti Remover CASE
List Price: $49.78Our Price: $49.78
List Price: $98.26Our Price: $98.26

Setup Cost: $0.00

TAGINATOR Graffiti Remover 5 GAL.
List Price: $229.56Our Price: $229.56
Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Spotlight on Giant HR Series Pumps   Leave a comment


Spotlight on Giant HR Series Pumps
Light Industrial Pumps

Giant HR Series Pumpsincludes Unloader, Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories.Click the following pump models to view the pump manual in PDF format.
Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
1.8
2000
3450
3.3
Brass
HR2527 2.5 2700 3450 4.6 Brass
HR3025 3.0 2500 3450 6.8 Brass
HR3030 3.0 3000 3450 6.2 Brass

Spotlight on Giant HR Series Pumps

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

How to remove a Direct Drive Pump in a Pressure Washer   Leave a comment


Direct Drive Pressure Washer  Pump Removal
The following steps will assist you in removing your pump from your gas
engine or electric motor on your pressure washer.
1. To start the process, spray a few drops of penetrating oil onto the top groove
or two small rectangular slots on the sides of the pump flange.
2. Remove the mounting bolts and washers securing the pump to the drive.
3. Loosen set screw.
4. Insert a flat head screwdriver into the two opposing slots on the mounting
flange and pry pump from gas engine or electric motor. Apply only reasonable
pressure. Do not force separation.
5. If pump resists the separation, insert two full threaded screws into the two
special holes in the pump mounting flange. Thread in deep enough to make
contact with the gas adapter plate or electric motor face. Then continue to thread
in the bolts in an alternating pattern to separate the pump from the drive. Apply
only reasonable torque. Do not force separation.
6. A strong bond may develop in any direct drive installation and may increase
with heavy duty operation and time. It may be necessary to repeat one or more of
these steps.
NOTE:
To ease the stress of future repairs, make a habit of removing the pump and
applying anti-seize lubricant on a semiannual basis. With the heat that is
generated in the crankshaft area, anti-seize won’t last forever.

With the pump removed, apply a moderate layer of anti-seize lubricant to the
pump’s crankshaft and a small bead of high-heat caulk around the middle of the
motor or engine’s crankshaft to seal out any moisture to the coupling.
To purchase Anti-Seize Lubricant, see:
http://www.etscompany.com/cleaning_products/product_info.php/products_id/55057/
IS YOUR DIRECT DRIVE PRESSURE WASHER PUMP STUCK?
The procedure: Loosen the four flange bolts equally so that two threads are
exposed. Start the motor and the centrifugal force of the spinning motor should
cause the pump to move outward toward the bolt heads. You may have to help
the pump by pulling on it while the motor is running. Once the pump has moved
to the bolt heads, stop the motor and loosen the bolts so that another two threads
are exposed.
Once the pump has moved, say 3/8”, remove the flange bolts completely and
start to pull the pump off the crankshaft. You may still have to pry the pump off,
but it will be much easier. And the best part is, no broken parts to clean up!

ETS Co. Inc. http://www.etscompany.com/

Pdf can be found here: http://www.etscompany.com/Direct_Drive_Pump_Removal.pdf

Spotlight on AR (Annovi Reverberi) RMW Pumps   Leave a comment


Spotlight on AR (Annovi Reverberi) RMW Pumps
RMW Series Pumps
First Choice When Quality Matters AR (Annovi Reverberi) RMW Pumps
Form RMW-OM 1006
High Performance AR (Annovi Reverberi) RMW Pumps
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Description
This plunger pump will pump up to 2.5 GPM at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 – 5.5 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system.

AR (Annovi Reverberi) RMW Pumps 3400 rpm D Version
Model Max GPM Max PSI
RMW2G20D 2.0 2000
RMW2G23B 2.0 2300
RMW2G25D 2.0 2500
RMW2.5G20D 2.5 2000
RMW2.5G23B 2.5 2300
RMW2.5G25D 2.5 2500

COMPLETE PDF ON AR (Annovi Reverberi) RMW Pumps CAN BE FOUND HERE.

AR (Annovi Reverberi) RMW Pumps

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Spotlight on ANNOVI REVERBERI RCW10.15N   Leave a comment


Spotlight on ANNOVI REVERBERI RCW10.15N
RCW10.15N AR (Annovi Reverberi) Pump 2.65 GPM @ 2200 PSI, Car Wash Pump

Annovi Reverberi RCW10.15N Pump Break Down click here

Industrial triplex car wash pumps a perfect marriage with any vehicle wash system. Belt-driven or direct-drive pumps are specially designed for the purpose of Car Wash equipment and Car Wash supply. Specially designed seals, huge connecting rods, super thick ceramic plungers, premium bearings and forged brass manifold (with a lifetime warranty) insure the pump will give years of continuous, trouble free service. AR heavy-duty car wash pumps provide low maintenance and allow service to be quick and affordable.

Max GPM………………2.65 Max LMP…………………………10

Max PSI………………….2200 Max Bar………………………….150

Power EBHP……………4 Bore Dia. mm…………………….18

Stroke mm……………….14.6 Weight Lbs………………………..21

Max Temp……………….140° Oil Capacity………………………15oz

Inlet Thread ……………1/2”F Discharge Thread……………….3/8”F

Special Features

Model: RCW10.15N – 950 rpm

• Manifold:

– Forged Brass and Nickle Plating: Strength and no porosity – long life. higher hydrostatic pressures – safety, performance.

– Inlet and Discharge Ports: Heavy bosses for added strength.

– Offset Discharge Ports: High efficiency, smooth flow.

– Bolts: Eight bolts, 8mm, grade 8.8. Stainless steel.

• Valves:

– Valve Caps: Stainless steel, higher, better hydrostatic loads.

– Ultra Form Cages: Durable, strength, and long life.

– Poppets, Seat and Spring: 303 and 400 series stainless steel.

• Packing and Plungers:

– High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.

– Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.

– Support and Guides: Machined brass, 1-piece over sized construction to assure proper plunger alignment and to maximize packing and seal life.

– Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient. Ultra thick wall.

• Bearings: Oversized tapered roller bearing for maximum life and load disbursement. Premium SKF.

• Bearing Support: Precision die-cast and machined to assure concentricity and alignment.

• Crankcase: Precision die-cast, large cooling fins and coating (for maximum heat dissipation and chemical resistance).

• Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).

• Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.

• Rod Pins: Precision ground and hardened steel, oversized for load disbursement.

• Connecting Rods: One-piece bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

• Crankshaft: Forged, precision ground and hardened for extremely long life and durability.Available in 24mm solid shaft, hydraulic motor and gear box drives. Shaft key set screws are standard on high speed version for long shaft life.

• Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.

• Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase. Stainless steel plugs.

• Ports: Two 1/4” discharge ports.

• Oil Capacity: 15.5 oz.

• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.

• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.

• Hot Water: High temperature kits are available to 180°F.

• Wet End Repair: Very simple no special tools are required.

• Design: Using Advanced Fluid Handling Design Programs. Overall Pump Efficiency is increased.

List Price: $1,000.00

Our Price: $671.00

You save $329.00!

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.