Spotlight on CAT Pump 2SF22ES   Leave a comment


Spotlight on CAT Pump 2SF22ES
2SF22ES 2.2GPM 2000PSI 3450RPM 5/8″ SHAFT

CAT PUMP 2SF22ES  Plunger, 2.2/2000, 3450 RPM, Elec 5/8″ shaft, w/Unloader, BB/S-Valves.

CAT PUMP 2SF22ES Features:

2.2 GPM

2000 PSI

3450 RPM

REGULATING UNLOADER

OIL CAPACITY 11.83 OZ

ELECTRIC 5/8″ HOLLOW SHAFT WITH BOLT MOUNT

Cat Pump Breakdown for 2SF22ES Click here

Direct-Drive

Plunger Pumps

Electric Models

2SF22ES

PUMP FEATURES

• Ultimate portability – less than 11 pounds – less than 10” long.

• Unique spring loaded inlet valves and the flow through ceramic plungers provides a smooth, steady flow.

• Optional 3450 or 1725 RPM models for gas or eletric drive.

• Regulating Unloader is standard on each pump to assuresystem pressure control and pump protection.

• Special HT and FPM seals and FPM or EPDM O-Rings for liquid compatibility.

COMMON PUMP SPECIFICATIONS

Inlet Pressure Range..(Standard) Flooded to 75 psi (Flooded to 5.25 bar)

………………………………(Hi-Temp) 30 to 75 psi (2.1 to 5.25 bar)

Bore……………………………………… 0.708” (18 mm)

Max. Liquid Temperature.(Standard) 160°F (71°C)

………………………………(Hi-Temp) 190°F (88°C)

Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.

Crankcase Capacity……………….. 11.83 oz. (.35 l)

Inlet Ports (1)…………………………. 3/8” NPTF (3/8” NPTF)

Discharge Ports (2)…………………. 3/8” NPTF (3/8” NPTF)

By-Pass Ports (1)…………………… 1/4” NPTF (1/4” NPTF)

Weight (Pump Only)……………….. 10.6 lbs. (4.8 kg)

Dimensions (Pump Only)…………. 9.13 x 6.65 x 6.50” (232 x 169 x 165mm)

SPECIFICATIONS

U.S. Metric U.S. Metric

Measure Measure Measure Measure

MODEL 2SF22ES

Flow……………………. 2.0 gpm (7.6 l/m) 2.2 gpm (8.3 l/m)

Max. Discharge Pressure 2000 psi (140 bar) 2000 psi (140 bar)

Max. RPM……………. 3450 rpm (3450 rpm) 3450 rpm (3450 rpm)

Stroke…………………. 0.122” (3.1 mm) 0.132” (3.35 mm)

Optional Electric-3/4” Shaft – 2SF30GES, 2SF35GES

ES, ELS = Electric 5/8” hollow shaft with bolt mount

GES = Electric 3/4” hollow shaft with bolt mount

GS = Gas 3/4” hollow shaft with bolt and adapter mount

Mounting Flange: SAE J609, Flange A, Extension 3 (3/4ӯ)

Shaft Length: 2.296, Pilot Ø= 1 5/8”,B.C. Ø= 3 5/8”, Thread= 5/16”- 24 UNC Tap

Refer to pump Service Manual for repair procedure and additional technical information.

“Customer confidence is our greatest asset”

All High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices could result in personal injury or damage to pump or property. CAT PUMPS does not assume any liability or responsibility for the operation of a customer’s high pressure system.Read all CAUTIONS and WARNINGS before commencing service or operation of any high pressure system. The CAUTIONS and WARNINGS are included in each service manual and with each Accessory Data sheet. CAUTIONS and WARNINGS can also be viewed online or can be requested directly from CAT PUMPS.

CAT Pump 2SF22ES Service Manual click here.

List Price: $630.70

Our Price: $485.32

Equipment Trade Service Co. Inc.has been providing Industrial Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: