Archive for the ‘pressure washer pumps’ Category

Free Pressure Washer Pump Estimates from ETS Co*   Leave a comment


FREE PUMP REPAIR ESTIMATE*

Call our service department at 1-877-824-7763 x 120 to discuss ETS Co repairing your pressure washer pump.  Ship it to us via UPS /FedEX (trackable service) **, ETS will estimate your pump, call you for repair approval and ship it back to you.

* Estimate is free to customers who choose to have ETS Co. Repair their pump
** Customers are responsible for shipping costs to and from ETS Co.
Advertisements

CAT 67DX39G1I Direct Drive Plunger Pump   Leave a comment


CAT 67DX39G1I Direct Drive Plunger Pump

This is a direct-drive triplex plunger pump, constructed of a brass manifold, 304SS stacked valve assemblies, solid ceramic plungers and standard NBR (Buna-N) o-rings, Lo-Pressure seals and V-packings. This high performance, economy pump is a flange-mount, hollow-shafted pump designed to bolt directly to a gas engine drive, providing an easy, compact installation. This pressure washer pump comes standard with an integral Regulating unloader and fixed chemical injector.

– Triplex plunger dsign provides a smooth liquid flow

– Special concentric, high-density, polished solid ceramic plungers provide a true wear surface and extended seal life.

– Built-in flange mount for easy, direct mounting to most gas engines. Eliminates the need for pulleys, belts, gearboxes.

– Integral Regulating Unloader with built-in by-pass is standard for safety and pressure setting.

– Stacked stainless steel valve design for long life and easy servicing.

– Fixed Chemical injector is standard and mounts directly onto Unloader to provide cleaning flexibility.

Features

  • 3.9 GPM
  • 4000 PSI
  • 3450 RPM
  • 1″ Hollow Shaft
  • Crankcase capacity 13.5 oz
  • Built-in unloader and fixed chemical injector

CAT Pump 67DX39G1I Pump Breakdown Click Here.

Click Here to Purchase the CAT 67DX39G1I Pump

AR – Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft pumps   Leave a comment


AR – Annovi Reverberi XT 1750 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XTA2G15 2.11 2000 3 15 9.6 10
XTA2G22 2.11 2200 3 15 9.6 11
XTA3G16 3 1600 3 18 9.6 10
XTA3G19 3 1900 4 18 9.6 11
XTA3G22 3 2200 4.5 18 9.6 11

XT 1750 Pump Break Down Click Here.

For all Annovi Reverberi Pump Breakdowns click here.

To Order Annovi Reverberi XT 1750 N Version Pumps Click here.

Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft   Leave a comment


AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

Max Max Power Bore Stroke Weight
Model GPM PSI EBHP Dia mm mm Lbs.
XT8.14 2.11 2000 3 15 11 11
XT9.14 2.37 2000 3.3 18 8.4 11
XT11.14 2.9 2000 4 18 11 11

XT 1450 Pump Break Down Click Here.

XT8.14 Annovi Reverberi pump

Features

  • GPM 2.11
  • PSI 2000
  • EBHP 3
  • Shaft Diameter 24mm
  • Oil Capacity 10 OZ
  • INLET 1/2″ F
  • OUTLET 3/8″ F

XT9.14 Annovi Reverberi pump

Features

  • 2.37 G.P.M.
  • 2000 PSI
  • 3.3 Power EBHP
  • 18MM Bore Diam.
  • 8.4MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

XT11.14 Annovi Reverberi pump

Features

  • 2.9 G.P.M.
  • 2000 PSI
  • 4.0 Power EBHP
  • 18MM Bore Diam.
  • 11MM Stroke
  • 1450 RPM
  • 24MM Solid Shaft
  • High strength forged brass manifold
  • 6 – 6MM bolts
  • Ceramic plungers w/ thicker wall to help prevent thermal shock
  • Stainless Steel Valves

CLICK HERE to purchase any of the AR – Annovi Reverberi XT 1450 rpm N Version 24mm Solid Shaft

CAT 650 PLUNGER PUMP   Leave a comment


CAT 650 PLUNGER PUMP

CAT Pump 650 (plunger pump)

Features

  • Superior Design
  • Triplex plunger design provides smoother liquid flow.
  • V-Packings are completely lubricated and cooled by the liquid being
  • pumped.
  • Lubricated Lo-Pressure Seals provide double protection against
  • external leakage.
  • Oil bath crankcase assures optimum lubrication.
  • Close tolerance concentricity of the ceramic plunger offers perfect
  • alignment and maximizes seal life.
  • Quality Materials
  • All stainless steel valves are heat treated and seats are roller
  • burnished for a positive seal and extended valve life.
  • Bronze or Duplex Stainless Steel manifolds are strong and corrosion
  • resistance.
  • Special concentric, high-density, polished, solid ceramic plungers
  • provide atrue wear surface and extended seal life.
  • Specially formulated, CAT PUMP exclusive, V-Packings offer
  • unmatched performance and seal life.
  • Die cast aluminum crankcase provides high strength, minimum
  • weight and precision tolerance control.
  • Chrome-moly crankshaft gives unmatched strength and surface
  • hardness.
  • Oversized crankshaft bearings with greater loading capacity mean
  • longer bearing life.
  • Easy Maintenance
  • Wet-end is easily serviced without entering crankcase, requiring less
  • time and effort.
  • Inlet and discharge valve assemblies interchange for easier
  • maintenance without disturbing piping.
  • Preset packings mean no packing gland adjustment is necessary,
  • reducing maintenance costs.
  • SECIFICATIONS
  • Flow……………………………………………7.0 GPM (27 L/M)
  • Pressure Range…………………100 to 3000 PSI (7 to 210 BAR)
  • RPM ………………………………………..1000 RPM (1000 RPM)
  • Inlet Pressure Range……………..–5 to +60 PSI (–0.35 to +4 BAR)
  • Bore……………………………………………….. .787″ (20 mm)
  • Stroke…………………………………………….1.181″ (30 mm)
  • Crankcase Capacity …………………………42 oz. (1.26 L)
  • Maximum Liquid Temperature……………160°F (71°C)
  • Above 130°F call CAT PUMPS for inlet conditions and elastomer recommendations.
  • Inlet Ports (2) …………………………….3/4″ NPTF (3/4″ NPTF)
  • Discharge Ports (2)…………………….1/2″ NPTF (1/2″ NPTF)
  • Pulley Mounting ………………………..Either Side (Either Side)
  • Shaft Diameter ………………………………. 1.181″ (30 mm)
  • Weight……………………………………………44 lbs. (19.9 kg)
  • Dimensions…………………..16.28×12.99×6.44″ (413.50x330x163.50 mm)

CAT Pump 650 Plunger Pump Breakdown Click Here

CAT Pump 650 Plunger Pump Service manual Click Here

List Price: $3,395.34

Our Price: $2,612.71

Purchase the CAT 650 PLUNGER PUMP here

CAT Pump – 10 Frame Piston Pump, 623.011   Leave a comment


CAT Pump – 10 Frame Piston Pump – model 623.011

Features

  • 6.0GPM,1200PSI
  • Triplex Uniflow design provides continuous forward liquid flow for
  • smooth operation.
  • Wetted cups and floating pistons are lubricated and cooled by
  • pumped liquid for long cup life.
  • Mechanically actuated inlet valves give strong lift and easy prime.
  • Oil bath crankcase assures optimum lubrication.
  • 100% wetted seal design allows pumped liquid to cool and lubricate
  • for longer life.
  • Cylinder and sleeve wear surfaces are hard chrome plated 304
  • stainless steel for maximum durability and abrasion resistance.
  • Chrome plated, brass manifolds and optional stainless steel
  • manifolds are strong and corrosion resistant.
  • Special high strength TNM connecting rods offer superior bearing
  • quality strength.
  • Chrome-moly crankshaft gives unmatched strength and surface
  • hardness.
  • Oversized crankshaft bearings with greater loading capacity mean
  • longer bearing life

CAT Pump 623 data sheet CLICK HERE

CAT Pump 623 Service Manual CLICK HERE

CLICK HERE to Order CAT Pump 623

AR – ANNOVI REVERBERI RSV4G40H-F40 Pump   Leave a comment


AR – ANNOVI REVERBERI RSV4G40H-F40 4GPM 4000PSI 1″ GAS

The AR – Annovi Reverberi RSV4G40H-F40,

Features

  • MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures
  • BOLTS: Eight 6mm grade 8.8
  • PLUNGERS: Ceramic coated stainless steel
  • CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation
  • BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. this assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankcase from floating
  • VALVES, SEATS AND SPRINGS: Stainless steel with specially designed ultra form cages to provide long life and positive seating
  • SEALS AND V-PACKINGS: “V” style (D-1) buna-N strong and tightens under load
  • OIL SEALS: All are constructed of Buna-N riubber
  • PLUNGER RODS: Stainless steel construction for strength (no plating to scrape off) o-ring plunger sealing system
  • CONNECTING RODS: One piece special alloy aluminum and bronze based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction for added load strength

Specifications for the AR – Annovi Reverberi RSV4G40H-F40,

  • 1″ gas flange hollow shaft
  • Built-in adjustable unloader
  • Maximum flow: 4.0 GPM 15.1 LPM
  • Maximum Pressure: 4000 PSI 275 BAR
  • Minimum Horsepower: 15 Gas
  • Maximum temperature: 140F
  • Plunger: 15mm
  • Oil Capacity: 16 oz
  • Inlet thread: 1/2″ FPT
  • Discharge thread: 3/8″ FPT
  • Weight: 14 lbs.

List Price: $518.28

Our Price: $398.82

CLICK TO ORDER the AR – Annovi Reverberi RSV4G40H-F40

You save $119.46!