Archive for the ‘pressure washers’ Category

GIANT Pumps, Parts & Kits   Leave a comment


GIANT CONSUMER PUMPS
GIANT GXR Vertical or Horizontal Pumps with Regulator includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories
Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
GXR 2424 2.4 2400 3450 5.2 Brass
GXR 2224 2.2 2400 3450 5.0 Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT GX Vertical or Horizontal Pumps with Unloader includes Siphon Injector, Thermal Relief Valve and Engine Mounting Accessories GX2525
Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
2.0
2500
3450
3.4
Brass
2.3
2500
3450
3.9
Brass
GX 2525 2.5 2500 3450 4.3 Brass

Weight: 9 lbs. Bore Size: 3/4″ Horizontal, 7/8″ Vertical Max. Temperature: 80 degree F

Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT

GIANT P200 PUMPS

Series Triplex Plunger Pumps

P200 Pump Assemblies
P200 Belt Drive P200 Electric Drive
GIANT BELT DRIVE Pump
GIANT ELECTRIC DRIVE Pump
P200 Gas Drive
GIANT GAS DRIVE Pump

GIANT P200 Pump Assemblies

Model Max. GPM PSI Continuous PSI Intermittent Max. RPM Req’d BHP Fluid End
P205 0.5 2000 2500 1750 1.2 Brass
P206 0.8 2000 2500 1750 2.1 Brass
P205 0.9 2000 2500 3450 1.2 Brass
P208 1.0 2000 2500 1750 2.6 Brass
P230 1.1 2000 2500 1750 2.8 Brass
P209 1.5 2000 2500 1750 6.2 Brass
P206 1.5 2000 2500 3450 1.8 Brass
P223 1.7 2000 3000 1750 4.6 Brass
P210 1.8 2000 2500 1750 2.6 Brass
P217 1.8 2000 2500 1750 2.8 Brass
P208 1.9 2000 2500 3450 2.6 Brass
P230 2.0 2000 2500 3450 2.8 Brass
P221 2.3 2000 2500 1750 2.8 Brass
P209 2.7 2000 2500 3450 3.7 Brass
P223 3.0 2000 3000 3450 6.2 Brass
P217 3.3 2000 2500 3450 4.6 Brass
P210 3.3 2000 2500 3450 4.6 Brass
P218 3.4 2000 2500 1750 4.7 Brass
P219 4.2 2000 2500 1750 4.7 Brass
P221 4.2 2000 3450 5.8 Brass
P220 4.7 2000 2500 1750 6.5 Brass
GIANT P300 PUMPS

Series Triplex Plunger Pumps

GIANT P300 ASSEMBLIES
P300 Electric Drive P300 Gas Drive
GIANT P300 Series Pump with Electric Drive
GIANT P300 Series Pump with Gas Drive
P300 Belt Drive P300 Gas Drive 2
GIANT P300 Series Pump
GIANT P300 Series Pump with Gearbox

GIANT P300 SERIES PUMPS

Model GPM Cont. PSI Cont.
PSI Inter.
Max. RPM Req’d BHP Fluid End
P340 3.5 3500 4000 1750 8.4 Brass
P317 3.7 3000 3500 1800 7.7 Brass
P313 3.8 3200 3500 3450 8.4 Brass
P314 3.8 3500 4000 3450 9.2 Brass
P316 3.9 3000 3500 1450 8.1 Brass
P316 4.7 2500 3000 1750 8.1 Brass
P319 4.8 2500 3000 3400 8.3 Brass
P318 5.5 2000 1450 7.6 Brass
P318 6.6 2000 1750 7.6 Brass
GIANT 400 Series Triplex Plunger Pumps

P460
Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Notes
3.8
7250
1450
19.0
S.S.
5.5
5000
1450
19.0
Brass
5.5
3200
1450
19.0
Al.Bronze
7.5
3200
1450
14.8
Brass
5.5
4000
1450
15.2
Al.Bronze
8.3
2600
1450
14.9
Brass
10.0
2500
1450
20.7
Brass
10.7
2000
1450
15.6
Brass
13.0
1700
1460
15.2
Brass
13.0
1700
1460
15.2
Al.Bronze
13.0
2000
1460
15.2
316 S.S.

Weight: 37 lbs. Shaft Size: 28mm Max. Temperature: 160 oF (104 oF for P460) * Consult factory when operating at this speed.

Port sizes:

Pump Model Inlet Port Discharge Port
P420A/P422 (2) 1 ” NPT (2) 3/4″ NPT
P440 (2) 3/4″ NPT (2) 3/4″ NPT
P430 (2) 3/4″ BSP (2) 3/4″ BSP
P450A (2) 1/2″ BSP (2) 1/2″ BSP
P420-3100/P420-5100 (2) 1″ BSP (2) 3/4″ BSP
P460 (2) 1/2″ BSP (2) 1/2 ” BSP
GIANT Bentonite PumpsGiant Industries Bentonite pumps, are used for transporting of the Bentonite fluid used in the stabilization of bore holes in horizontal boring applications. These pumps range from up to 18.5 GPM – 84.5 GPM and up to 1500 PSI. All of these pumps are made of cast Iron fluid ends with solid ceramic plungers provide long life. And the gear end construction of heavy-duty cast iron crankcase, glazed, hardened and ground crankshaft and aluminum-bronze bearings provide years of life. With a seal life of 300-400 hours you can expect Performance Under Pressure with Giant.

BP5236

Volume:………………………………………Up to 18.5 GPM
Discharge Pressure:………………………….Up to 900 PSI
Speed:…………………………………………Up to 570 RPM
Inlet Pressure:…………………………………-4.35*-150PSI
Power Consumption:…………………………………..12 HP
Plunger Diameter:………………………………………36mm
Plunger Stroke:…………………………………………42mm
Crankshaft Diameter:………………………………….35mm
Key Width: ……………………………………………….8mm
Shaft Rotation:……………Top of pulley towards manifold
Temperature of Pumped Fluids: ……………Up to 104°F
Inlet Ports:……………………………………..(2) 1-1/2″ NPT
Discharge Ports:…………………………………..(2) 1″ NPT
Weight:………………………………………………….120 lbs.
Crankcase Oil Capacity:…………………………..116 fl.oz.
Fluid End Material:………………………………….Cast Iron
BP5236

BP6150

Volume:……………………………………..Up to 42.3 GPM
Discharge Pressure:……………………….Up to 1500 PSI
Speed:………………………………………..Up to 600 RPM
Inlet Pressure:……………………………….-4.35* -150PSI
Power Consumption:………………………………..43.8 HP
Plunger Diameter:……………………………………..50mm
Plunger Stroke:………………………………………..48mm
Crankshaft Diameter:…………………………………45mm
Key Width: …………………………………………….12mm
Crankshaft Mounting:…………………………..Either side
Temperature of Pumped Fluids: …………..Up to 104 oF
Inlet Ports:…………………………………….(2) 2-1/2″ NPT
Discharge Ports:…………………………….(2) 1-1/4″ NPT
Weight:……………………………………………..275.5 lbs.
Crankcase Oil Capacity:…………………………..1.1 Gal.
Fluid End Material:………………………………..Cast Iron
BP6150

BP7170

Volume:………………………………………Up to 84.5 GPM
Discharge Pressure:……………………….Up to 1015 PSI
Speed:………………………………………..Up to 560 RPM
Inlet Pressure:………………………………..-4.35* -150PSI
Power Consumption:…………………………………..59 HP
Plunger Diameter:………………………………………70mm
Plunger Stroke:…………………………………………52mm
Crankshaft Diameter:………………………………….48mm
Key Width: ………………………………………………14mm
Crankshaft Mounting:…………………………….Either side
Temperature of Pumped Fluids: ……………Up to 104 oF
Inlet Ports:……………………………………..(2) 2-1/2″ NPT
Discharge Ports:……………………………..(2) 1-1/4″ NPT
Weight:………………………………………………….423 lbs.
Crankcase Oil Capacity:…………………………….1.1 Gal.
Fluid End Material:………………………………….Cast Iron
BP7170
GIANT Light Industrial Pumps

Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End
1.8
2000
3450
3.3
Brass
HR2527 2.5 2700 3450 4.6 Brass
HR3025 3.0 2500 3450 6.8 Brass
HR3030 3.0 3000 3450 6.2 Brass

Weight: 9 lbs. Bore Size: 3/4″ for HR2527, 1″ for HR3030 Max. Temperature: 80 degree F Inlet Port: 1/2″ NPT Discharge Port: 3/8″ NPT
GIANT HIGH TEMPERATURE PUMPS

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Shaft (mm)
P46HT 2.1 900 750 1.3 Brass 18
P46W-HK+ 4.5 1700 1655 5.3 Brass 18
P56HT 3.2 900 750 2.0 Brass 22
P56W-HK+ 7.1 2500 1655 10.2 Brass 22
MP4130HT 10.5 1200 750 8.6 Al. Bronze 28
MP4130HTC* 10.5 1200 750 8.6 Al. Bronze 28
LP121HT 17.6 1200 570 14.6 Al. Bronze 35
LP121HTC* 17.6 1200 570 14.6 Al. Bronze 35

Max. Temperature: 220 oF + Max. Temperature: 190 oF * HTC = Pumps with coolant connection

GIANT CORROSION RESISTANT PUMPS

Aluminum Bronze Manifolds & 316 Stainless Steel Internal Wet End Parts

Model Max. GPM Max. PSI Max. RPM Req’d BHP Weight (lbs) Shaft (mm)
P221AR-3100 2.3 2000 1750 3.2 12 24
P217A-3100 3.4 2000 3450 4.7 12 24
P218A-3100 3.4 2000 1750 4.7 12 24
P219A-3100 4.2 2000 1750 5.8 12 24
P220A-3100 4.7 2000 1750 6.4 12 24
P230A-3100 1.1 2000 1750 2.8 12 24
P420A-3100 13.0 1700 1460 15.2 37 28
P430A-3100 5.5 5000 1460 19.0 37 28
MP4130-3100 15.2 1900 1085 20.0 72 28
LP122A-3100 39.0 1300 885 34.5 116 32
GP6145A-3100 46.2 1740 800 55.8 309 42
GP7155A-3100 66.0 1500 700 70.5 455 48

316 Stainless Steel Manifolds and Internal Wet End Parts

Model Max. GPM Max. PSI Max. RPM Req’d BHP Weight (lbs) Shaft (mm)
2.3
2000
1750
3.2
12
24
P217A-5100 3.4 2000 3450 4.7 12 24
P218A-5100 3.4 2000 1750 4.7 12 24
P218A-5100E 3.4 2000 1750 4.7 12 24
P219A-5100 4.2 2000 1750 5.8 12 24
P219A-5100E 4.2 2000 1750 5.8 12 24
P220A-5100 4.7 2000 1750 6.4 12 24
P220A-5100E 4.7 2000 1750 6.4 12 24
P56-5100 7.1 2100 1655 10.2 22 18
P420A-5100 13.0 1700 1460 15.2 37 28
LP121A-5100 36.0 1300 885 32.1 116 35
GP5145-5100 43.3 1500 750 44.8 179 35
GP7155-5100 66.0 1500 700 70.5 455 48
P230A-5100 1.1 2000 1750 2.8 12 24
P55-5100 4.9 2320 1420 7.8 18 24
P450-5100 5.5 5000 1450 19 37 28
P422-5100 10 2200 1450 15.2 37 28
LP301A-5100 14.2 4000 1000 39.2 119 35
LP600-5100 9.8 6000 1000 40.6 119 35
LP250A-5100 26 2200 1000 39.4 119 35
GP5136-5100 33.8 2300 910 53.6 179 35
GP7142-5100 38.4 2600 700 68.9 374 52
GIANT CO2 Pumps

CP205, CP218, CP220
CP205
Flow:…………………………………Up to 0.21 GPM
PSI:…………………………………….2000/2500 PSI
RPM:……………………………………………….1750
Inlet Ports: ……………………………..(2) 1/2″ BSP
Discharge Ports: ………………………(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz
CP218
Flow:…………………………………..Up to 1.4 GPM
PSI:……………………………………………2030 PSI
RPM:…………………………………………………750
Inlet Ports:……………………………….(2) 1/2″ BSP
Discharge Ports:……………………….(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:……………………………………11 lbs. 11oz.
CP220
Flow:…………………………………Up to 1.93 GPM
PSI:……………………………………………2030 PSI
RPM:…………………………………………………750
Inlet Ports: ……………………………..(2) 1/2″ BSP
Discharge Ports: ………………………(2) 3/8″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz.
CP420 CP7155
CP420
Flow:…………………………………Up to 6.4 GPM
PSI:…………………………………………..1810 PSI
RPM:…………………………………………………750
Inlet Ports: ……………………………..(2) 3/4″ NPT
Discharge Ports: ………………………(2) 3/4″ NPT
Temp. of pumped fluids:……………………….-40oF
Weight:…………………………………..11 lbs. 11oz
CGP7155
Flow:…………………………………Up to 51.5 GPM
PSI:……………………………………………1450 PSI
RPM:………………………………….Up to 550 RPM
Inlet Ports:…………………………….(2) 2-1/2″ NPT
Discharge Ports:……………………..(2) 1-1/4″ NPT
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………………….455 lbs
CLP200
Flow:…………………………………Up to 9.5 GPM
PSI:…………………………………………..1750 PSI
RPM:………………………………………………..500
Inlet Ports: ………………………..(2) 2X1-1/4″ BSP
Discharge Ports: …………………….(2) 2X1 ” BSP
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………….. 119 lbs.
CLP121A
Flow:…………………………………Up to 16.3 GPM
PSI:……………………………………………1740 PSI
RPM:…………………………………. 500 RPM
Inlet Ports:…………………………….(2) 1-1/4″ BSP
Discharge Ports:……………………. (2) 1-1/4″ BSP
Temp. of pumped fluids:……………………….-40oF
Weight:………………………………………….119 lbs

GIANT Industrial Triplex Plunger Pumps

P46/P55/P56 Pumps

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Notes
P57 1.4 6500 1420 6.0 S.S.
P46 3.9 2200 1420 5.3 Brass
P55 6.0 2320 1750 10.2 Brass
P56 7.5 2200 1750 10.2 Brass
P56-5100 7.1 2100 1655 10.2 316 S.S. Standard Seals
P56-5111 7.1 2100 1655 10.2 316 S.S. Viton Seals
P56-5121 7.1 2100 1655 10.2 316 S.S. Teflon/Viton Seals

* Includes Pump, Unloader, Pop-off valves, Two Guns, Pressure Switch, Thermal Relief Valve Weight: 18 lbs. Shaft Size: 18mm for P46W, 22mm for P55, P56, P56-5100, P57, 24mm for P54, P58, P59 Max. Temperature: 160 degree F

P54/P58/P59 Pumps

Pump Model Max. GPM PSI Continuous PSI Intermittent Max. RPM Req’d BHP Fluid End
P54 4.8 4000 3300 1750 11.0 Brass
P54GB 4.8 4000 3300 1750 11.0 Brass
P58 6.0 3500 3000 1750 12.1 Brass
P58GB 6.0 3500 3000 1750 12.1 Brass
P59 9.0 1900 1000 1750 10.0 Brass
P59GB 9.0 1900 1000 3500 10.0 Brass
P59DG* 9.0 1900 1000 3500 10.0 Brass

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
P46/P55/P56/P56-5100/P56-5100/P57 (2) 1/2″ BSP (2) 3/8″ BSP
P54/P58/P59 (2) 3/8″ BSP & (1) 1/2″ BSP (2) 3/8″ BSP

GIANT SP Pumps

Pump Model Max. GPM Max. PSI Max. RPM BHP Max. Temp. F
SP100W 11.2 2000 1420 14.5 160° F
6.7
3200
1420
14.8
160° F

Weight: 30 lbs. Shaft Size: 28mm Max. Temperature: 160 degree F Inlet Port: (2) 3/4″ NPT Discharge Port: (2) 3/8 ” NPT

GIANT MP Series Pumps

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Note
MP4120W 8.7 3600 1420 21.8 Al. Bronze
MP4124W 12.6 3000 1420 21.0 Al. Bronze
MP4130 15.2 1900 1085 20.0 Al. Bronze

Weight: 72 lbs. Shaft size: 28 mm Max. Temperature: 160 oF

Port sizes:

Pump Model Inlet Port Discharge Port
All (2) 1” NPT (2) 3/4″ NPT

GIANT LP Series Pumps

LP301 LP1000 LP700
LP301 LP1000 LP700

Giant LP Series – High Pressure

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Note
LP1000 3.4 15000 1000 35.2 S.S
LP700 7.9 7250 1000 39.8 S.S
LP600 9.7 6000 1000 40.4 S.S
LP301A 14.1 4000 1000 50.0 S.S
LP400 15.1 3600 1000 37.6 Al. Bronze
LP301A* 18 4000 1270 49.7 S.S
LP200 19.0 2900 1000 38.4 Al. Bronze
LP450 19.7 2600 1000 35.5 Al. Bronze
LP350 22.6 2350 1000 36.1 Al. Bronze

GIANT LP Series – High Flow

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Note
LP250 26.0 2200 1000 39.7 Al. Bronze
LP255 26.0 2200 1000 39.7 Brass
LP122A 39.0 2000 885 56.3 Al. Bronze
LP123 39.0 2000 885 56.3 Brass

* Intermittent duty only

Weight: 116 lbs. Shaft Size: 35mm

Max. Temperature: 140 degree F (104 F for LP1000)

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
LP200/LP301A/LP600 (3) 1-1/4″ BSP (2) 1″ BSP
LP350/LP400/LP450 (2) 1-1/4″ BSP (1) 1″ BSP
LP700 (2) 3/4″ NPT (2) 1/2″ NPT
LP1000 (3) 1/2″ BSP (2) 3/8″ BSP
LP122/LP122A-4000/LP123 (2) 1-1/2″ NPT (2) 1″ NPT
LP250/LP255 (3) 1-1/2″ BSP (3) 1″ BSP

GIANT GP Series Pumps

GP7124A GP7255A
GP7124A GP7255A

GIANT GP Series – High Pressure

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Notes
GP7122 9.9 10150 750 69.3 S.S
GP7124A 12.7 7250 750 65.7 S.S
GP6124 12.8 5800 800 53.1 S.S
GP6128 18.0 4000 800 51.0 S.S
GP7132 23.4 4350 750 73.0 S.S
GP7136 28.3 3650 750 73.0 S.S
GP5132 27.7 2900 1000 60.0 Cast Iron
GP51 weight: 179 lbs Shaft Size: 35mm Max. Temperature: 140 oF
GP61 weight: 309 lbs Shaft Size: 42mm Max. Temperature: 140 oF
GP71 weight: 374 lbs Shaft Size: 48mm Max. Temperature: 140 oF

GP Series – High Flow

Pump Model Max. GPM Max. PSI Max. RPM Req’d BHP Fluid End Note
GP5136 33.8 2300 960 53.1 Cast Iron
GP5145 43.5 1500 750 44.8 Cast Iron
GP7150A 54.5 1900 700 74.0 Al. Bronze
GP7155 65.8 2000 700 55.3 Al. Bronze
GP7255A 66.0 2000 700 94.3 Cast Iron
GP51 weight: 179 lbs Shaft Size: 35mm Max. Temperature: 140 oF
GP61 weight: 309 lbs Shaft Size: 42mm Max. Temperature: 140 oF
GP71 weight: 374 lbs Shaft Size: 48mm Max. Temperature: 140 oF

Inlet Port & Discharge Port:

Pump Model Inlet Port Discharge Port
GP5132/GP5136/GP5145 (2) 1-1/2″ BSP (2) 1″ BSP
GP6124/GP6124-4000/GP6128 (2) 1-1/2″ BSP (2) 1″ BSP
GP6132/GP6140/GP6145/GP6145-4000 (2) 2-1/2″ NPT (2) 1-1/4″ NPT
GP7122 (2) 1-1/4″ BSP (2) 3/4 ” BSP
GP7124A/GP7128/GP7132 (2) 1-1/4″ NPT (2) 3/4″ NPT
GP7136 (2) 1″ NPT (2) 1-1/4″ NPT
Advertisements

ETS BOLT-N-GO PUMP SPECIAL!   Leave a comment


THIS PUMP SHIPS WITH A MANUAL, BOLT-ON STYL UNLOADER, THERMAL RELIEF VALVE, GARDEN HOSE THREAD AND FILTER & 3/8″ PLUG OUTLET! XMV3G27D-F25 AR (Annovi Reverberi) Pump 3 GPM @ 2700 PSI, Great for 5 & 5.5 HP Gas Engines!

For parts just enter any part number on this breakdown in our search box for pricing and availability.

PARTS LIST: XMV 3400 rpm

  • MANIFOLD: High strength forged brass for long term use.
  • BOLTS: Eight 6mm grade 12.9.
  • PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience.
  • CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
  • BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
  • VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating.
  • SEALS AND V-PACKINGS: Continuously lubricating for extended life.
  • PLUNGER RODS: High strength stainless steel.
  • CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.

List Price: $789.63

Our Price: $361.73 CLICK TO PURCHASE

You save $427.90!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Flat Rotary Surface Cleaners for Pressure Washers   Leave a comment


Flat Rotary Surface Cleaners for pressure washers.

Units, pricing and specs click here..

Pressure Washer Surface Cleaners

How To Deep Clean Large Flat Surfaces?

The solution is our flat surface cleaners

Pressure washer surface cleaners are powerful and reliable. They are used for high pressure cleaning driveways, concrete floors, parking lots, roofs, warehouses, boat ramps, garage floors, boat decks, and more. The benefits of using these products are clear: effective, shorter working times, enormous energy savings and long useful life due to their high industrial quality. You will be able to complete your power washing tasks in the shortest possible amount of time.

HOW DO SURFACE CLEANERS WORK?

High speed flat surface cleaners can consist of 2 or 3 (dual or tri arm) arms that spin in a counter clock wise direction for up to 1800 RPM (rotations per minute). At the end of each arm you will find a 1/4” MEG 25° spray nozzle that can cover the path from 16” to 30” diameter, depending on the size of the actual round housing. These cleaners can remove dirt for up to 15 times faster then the standard wands and 10 times faster than the water brooms. Operation: the user walks behind the unit holding the two handles from which one of them has a spray gun that works the same like any other pressure washer gun. The arms are connected to the shaft that is part of the spinning head (a mechanism that allows smooth rotation of the arm). These arms rotate/spin with the flow of the water (greater the water volume – the faster the spinning times), which creates a scrubbing action with the water coming out. The spray nozzles are only 1/2” to 2” away from the surface which allows greater cleaning capabilities. The edge of the housing and the brush skirt protect the surrounding area from over spraying. Some of our models come with the casters and some without. Units without the casters are designed to “hover” or “float” above the ground, so the maneuverability is not an issue. The greatest advantage of these machines is that they eliminate the “zebra” stripping usually found on driveways and sidewalks.

Some of the many uses for this pressure washer surface cleaner include:

Tennis Courts

Shuffleboard Courts

Basketball Courts

Roofs – Excellent Results with Clay Tile Roofs (Use Low Pressure on Shingle Roofs)

Pool Decks

Sidewalks

Driveways

Loading Docks

Warehouse Floors

Refrigerated Semi Trailer Floors

Operating Instructions of a Surface Cleaner

1) Connect to Pressure Washer.

2) Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use Teflon tape when installing nozzles.

3) Start Pressure Washer. The flat surface cleaner is ready for operation.

4) Walk slowly behind the flat surface cleaner, cleaning as you go. If striping occurs, slow down your pace.

5) Periodically check weep hole on bottom of swivel. Water will seep slowly; if water shoots out, stop and replace seals. Swivel assembly can be rebuilt.

6) For maximum effectiveness keep spray nozzles clean. If the machine vibrates, stop and clean spray tips.

7) Lubricate swivel with one squirt of good quality grease every 200 hours of operation or about once a month if used daily. A small amount of grease coming out of the bottom of the swivel is normal.

DO NOT ALLOW MACHINE TO REMAIN STATIONARY ON SOFT SURFACES, SUCH AS WOOD.

CAUTION: Striking any raised obstacle during operation will damage machine. If contact does occur and results in vibration when operating machine, STOP and replace spray bar. Continued operation could result in serious injury or damage to machine.

What are the Benefits of the Flat Surface Cleaner

How much time will this equipment actually save me (versus using the standard wand)?

The following comparison shows the time taken to clean a typical size driveway (400 sq. ft.) using 2 different components.

Flat Surface Cleaner – 10 minutes

Standard wand – 80 minutes
Is there any over spray?

The brush skirt will eliminate any over spray.

Is it easy to move and control?

The unit is easy to move around. (units equipped with casters turn 360 degrees)

How close does it get to walls?

With the surface cleaner, you’ve got full wall clearance.

Does it save water or does it use more?  How much?

It uses the same amount produced by your pressure washer.

You state that it has “enormous energy savings”, how so?

You just walk behind it, v.s. if you clean with the standard wand you have to swing the wand 200-300 times to clean a typical size driveway.

Does it have a lot of maintenance/upkeep?

It has a minimum moving parts therefore very few possibilities that something will break down.

Units, pricing and specs click here..

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

BackBoard Wood Brightener   Leave a comment


BackBoard Wood Brightener

BACKBOARDS™ is a mild acidic clear liquid wood restoring detergent. BACKBOARDS™ restores wood surfaces discolored by years of exposure to weathering elements. BACKBOARDS™ readily transforms old gray or blackened, moldy wood to its original appearance. BACKBOARDS™ dramatically reduces cleaning efforts and time allowing more effective restoration than pressure water blasting alone. BACKBOARDS™ and a gentle 500 to 1000PSI flush rinse eliminates gouging, splintering, furring, stop/start, overlapping marks and deep injections of water into the vulnerable wood fibers. BACKBOARDS™ is recommended for cedar, pressure treated, redwood and other types of wooden decks, shakes, roofs, fences and log cabins.
DIRECTIONS: Dilute with water as specified in the following ratios:
Wood restoration: Pressure washer cleaning: Full Strength or dilute up to 3 to 1 with water. Manual Scrubbing: Full Strength.
Mild Masonry Brightening: Full Strength Rust Stain Removal: Full Strength
RESTORATION TIPS -Ultra high pressure (greater than 2000 PSI) damages wood fibers. -DO NOT BLEACH! Sodium Hypochlorite solutions soften, raise the grain, and splinter wood fibers. Bleach also forms a film that deters follow up preservative penetration. Bleach and wood do not get along! -Use cold or warm water to pressure clean. Hot water softens wood causing fiber damage. -If a previous wood treatment is evident, a chemical stripper may first be required. Call ETS. -Follow up the wood restoration with a full bodied, replenishing wood preservative. Call ETS.
APPLICATIONS
Wood Restoration: Sweep or brush surface to be cleaned. Dampen wood surfaces with a water spray Generously apply Backboards by brush or garden pump sprayer. Agitate the surface with a medium bristle brush. Allow to set 15-20 minutes. If surface is drying, keep damp with a water mist spray. Gently flush rinse with a pressure washer to reveal a restored surface. If rinsing with a garden hose, additional scrubbing may be required. Mild masonry restoration and rust stain removal: Apply full strength let set 10-15 minutes, scrub if necessary, pressure rinse.
COMMENTS: Protect adjacent surfaces and plant life with light plastic draping. Mix well before using. Backboards is a saturated solution of high solids. Store above 50°F to prevent crystals forming on bottom of container. Warm the solution or dissolve crystals in hot water. Crystals will not effect products performance.

BACKBOARD, CONCENTRATE INDUSTRIAL CLEANING COMPOUND WOOD RESTORER LIQUID 1 GALLON *003

List Price: $9.50

Our Price: $9.50 Click to Order

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

GENERAL PUMP,T SERIES 47, – TS2021   Leave a comment


GENERAL PUMP,T SERIES 47, – TS2021

To order Click Here

For Pump Breakdown Click Here

FEATURES

• The preferred pump frame in the pressure cleaning industry

• Forged brass manifold with an exclusive lifetime warranty

• Large-capacity, die-cast, anodized aluminum oil-bath crankcase

• Over-sized connecting rods for maximum life

• Heavy-duty tapered roller bearing.

• Solid ceramic plungers with continuously lubricated packings

• Unitized stainless steel inlet and discharge valves

• Available in left-handed “L” version

List Price: $824.00

Our Price: $634.07

Sale Price: $612.00 To order Click Here

You save $212.00!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

HYPRO 9910-D30 Diaphragm Pump   Leave a comment


HYPRO 9910-D30 Diaphragm Pump

Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides, liquid fertilizers, and many other hard-to-handle fluids. Low-cost maintenance and almost wear-free operation make these pumps ideal for a wide variety of spraying jobs.

Pressure and output are designed for optimum performance of small to medium-sized sprayers. Hypro medium pressure diaphragm pumps can be adapted for male 1-3/8″ splined shaft, female 1-3/8″ splined shaft, 1″ solid shaft, or gear reduction drive options. Pumps include a pulsation dampener.

List Price: $969.00

Our Price: $632.39 Click to purchase

You save $336.61!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

COMET Pump ZWD4040G Pump Made Ready   Leave a comment


COMET Pump ZWD4040G Pump Made Ready

P.M.R. ZWD4040G-VRT3-310EZ, Comet Pump FULLY PLUMBED!

Comet PUMPS MADE READY ARE NOT TESTED PRIOR TO SHIPPING.  THE UNLOADER AND PRESSURE RELIEF VALVE MAY NEED ADJUSTING BEFORE USAGE.  *TESTING IS AVAILABLE ON 3400 RPM PUMPS MADE READY

Industrial grade Comet triplex pump with oil sight glass and oil drain plug. Includes EZ-grip quick connect coupler, water inlet with a clear bowl filter for easy inspection, and chemical injector. The pump features an adjustable pressure unloader, external bypass hose, and thermal relief valve to help protect the pump from overheating.

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.