Archive for the ‘General Pumps’ Category

GENERAL (GP) PUMP OIL 16 OZ. (IGOL-100216-1)   Leave a comment


EACH 16 OZ. GP PUMP OIL (GENERAL (GP) PUMP OIL 16 OZ. (IGOL-100216-1))

Specially blended pump crankcase lubricating oil, 30W viscosity, nondetergent. Approved and recommended for use in all General Pump/InterPump crankcases. Recommended for use in other pressure washer pump crankcases. Not for use in internal combustion engines.

Features

  • Special anti-scuff and anti wear agents extend the lives of gear, vane, radial piston and plunger pumps.
  • Resists foaming and aeration which would result in erratic equipment operation and increased oil oxidation.
  • Highly resistant to oxidation that would result in sludge formation.
  • Resists formation of harmful oil water emulsions.
  • Compatible with typically used seals and gaskets.
  • High viscosity index (VI) means more constant operating characteristics over wide temperature ranges.
  • Low pour point assures fluid flow during cold weather operation.
  • Outstanding thermal and hydrolytic stability assures long oil life.
  • Exceeds wear prevention requirements of all major hydraulic pump manufacturers.
  • Change oil after 40 hour break-in period, and every three months or 500 hour intervals thereafter.
  • Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance.

List Price: $8.24
Our Price: $6.34 Click to purchase General Pump Oil
You save $1.90!

General Pump TS 1011   Leave a comment


GENERAL PUMP,T SERIES 47 TS1011

  • The preferred pump frame in the cleaning industry
  • Forged brass manifold with an exdlusive lifetime warranty
  • Large capacity, die cast, anodized aluminum oil bath crankcase
  • Over sized connecting rods for maximum life
  • Heavy duty tapered roller bearing
  • Solid ceramic plungers with continuously lubricating packings
  • Unitized stainless steel inlet and discharge valves
  • Available in left handed “L” version
  • Triplex Plunger Pump
  • Maximum Volume: 4.0/4.75 GPM
  • Maximum Discharge Pressure: 2000/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1450/1750 RPM
  • Minimum Horsepower Requirements: 5.5 bhp (8.2 hp for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .472″ (12mm)
  • Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 11.4″ x 9.2″ x 6.9″
  • Weight: 30 lb.
  • Lubrication: Fill the crankcase to the dot on the oil gauge window pe specifications with SAE 30W oil. Change the oil after a 40 hour break in period, then every three (3) months or 500 hour intervals thereafter.

Need parts for this pump? Click here for the datasheet.

List Price: $717.08

Our Price: $551.79

You save $165.29!

CLICK TO PURCHASE HERE…

 

General Pump – Electric Pressure Washers   Leave a comment


General Pump Complete Electric Pressure Washers 

 

Photo(Where available) Part Name/Number Description

FOR99SM

FORMULA 99 – Turbo 21 pressure Washer, aluminum manifold

190118

QUIKY – Turbo 21 pressure washer,

brass manifold

PU1021

BOXJET – aluminum manifold

PU1021B

BOXJET – brass manifold

PU1021QB

QUIKY, brass manifold

CLEANMATIC

Pressure Washer

General Pump Electric Pressure Washer Accessories

 

 

 

Photo(Where available) Part Name/Number Description

No Photo

Z0BOXCART

Cart kit for Boxjet

No Photo

Z0BOXWALL

Wall Brackets for Boxjet

No Photo

Z0BRUSHKIT

Boxjet rotating brush kit

Z0SANDKIT1

Boxjet sandblasting kit

No Photo

100200

Universal cart for pressure washer

 

General Pump High Flow / High Pressure Pumps   Leave a comment


General Pump 66 Series High Flow The General Pump 66 Series High Flow pumps are versatile and feature a new triplex design that extends seal life! GPM ranges from 6.3 to 12.0 and pressures from 2500 to 3600 psi.  

 

Photo(Where available) Parts List Description

Triplex pump

TSF2021 (new pump price)

Triplex pump

TSF2219 (new pump price)

Triplex pump

TSF2221 (new pump price)

Triplex pump

TSF2421 (new pump price)

Triplex pump

General Pump 66 Series High Pressure The 66 Series General Pumps provide a COMPACT high pressure design providing from 4.3 to 5.5 gpm and from 5000 up to 5800 psi. 

 

Photo(Where available) Part Name/Number Description

TSP1621

High pressure triplex pump

TSP1819

High pressure triplex pump

 

General Pump T Series 69 The T Series 69 High-Flow general pumps offer a large crankcase that produces 8.0 to 12.0 gpm at low pressure. 

 

Photo(Where available) Part Name/Number Description

T41

Triplex plunger pump, 36mm bore

TS1041

Triplex plunger pump, 20mm bore

TS1531

Triplex plunger pump, 20mm bore

 

General Pump T Series 76 The T Series 76 General Triplex Plunger Pumps are the High Flow Industries choice! Lifetime warranty on manifold! From 6.6 gpm to 21 gpm & 1000 to 5800 psi max. 

 

Photo(Where available) Part Name/Number Description

T1551

Triplex plunger pump, 30mm bore

T4251

Triplex plunger pump, 20mm bore

T61

Triplex plunger pump, 45mm bore

T81

Triplex plunger pump, 45mm bore

 

General Pump T Series 48 The T Series 48 General Pumps are great for High-Flow / High Pressure Applications with its dual mainfold a.k.a, sixplex a.k.a. multiplex design, 9 to 11 gpm – high pressure, 2-3000 psi. 

 

Photo(Where available) Part Name/Number Description

T1631

Sixplex plunger pump

T2031

Sixplex plunger pump

TS1351

Sixplex plunger pump

 

General Pump T Series 77 The T Series 77 General Pumps are designed for High-Flow & High Pressure Applications – 25 gpm+ 

 

Photo(Where available) Part Name/Number Description

T121

Sixplex plunger pump, 45mm bore

T151

Sixplex plunger pump, 45mm bore

T1591

Sixplex plunger pump, 30mm bore

T3551

Sixplex plunger pump, 20mm bore

 

General Pump AT Series 75 AT Series 75 General pumps are ideal for grain cleaning and jetting applications with its dual pulsing action, 7.93 gpm up to 22.48 max gpm – low pressure. 

 

Photo(Where available) Part Name/Number Description

AT0033

Duplex plunger pump, splined shaft

AT0055

Triplex plunger pump, splined shaft

AT0088

Triplex plunger pump, splined shaft

 

General Pump AT Series 77 The AT Series 77 General Pumps are great for High-Flow applications with its dual manifold a.k.a, sixplex a.k.a. multiplex design, 29.1 to 45 gpm – low pressure. 

 

Photo(Where available) Part Name/Number Description

No Photo

AT0111

Sixplex plunger pump, splined shaft

No Photo

AT0177

Sixplex plunger pump, splined shaft

No Photo

AT0177B

Sixplex plunger pump, splined shaft

 

 

GENERAL PUMP,T SERIES 47, – TS2021   Leave a comment


GENERAL PUMP,T SERIES 47, – TS2021

To order Click Here

For Pump Breakdown Click Here

FEATURES

• The preferred pump frame in the pressure cleaning industry

• Forged brass manifold with an exclusive lifetime warranty

• Large-capacity, die-cast, anodized aluminum oil-bath crankcase

• Over-sized connecting rods for maximum life

• Heavy-duty tapered roller bearing.

• Solid ceramic plungers with continuously lubricated packings

• Unitized stainless steel inlet and discharge valves

• Available in left-handed “L” version

List Price: $824.00

Our Price: $634.07

Sale Price: $612.00 To order Click Here

You save $212.00!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

Valve Kit GENERAL PUMP – K01   Leave a comment


Valve Kit GENERAL PUMP – K01 Click to Purchase this kit here.

KIT 1 (K01) – VALVE ASSEMBLY [ GENUINE GENERAL PUMP PARTS ]

This General Pump repair kit (K01) services 6 cylinders and includes the following items:

O-ring:  90.3841.00

Valve seat:  36.2003.66

Valve:  36.2001.76

Spring:  94.7376.00

Valve guide:  36.2002.51

KIT 1 (K01) – VALVE ASSEMBLY fits Models: General Pump 47, 49, 50 and 51 Series

Specifications: 1 Per Pump.

List Price: $82.30

Our Price: $51.15 Click to order K01 Valve Kit from General Pump.

You save $31.15!

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.

T991 GENERAL PUMP,T SERIES 50   Leave a comment


T991 GENERAL PUMP,T SERIES 50

Features

  • Triplex Plunger Pump
  • Maximum Volume: 4.0/3.5 GPM
  • Maximum Discharge Pressure: 1100/1500 PSI
  • Maximum Inlet Pressure: 125 PSI
  • Maximum Pump Speed: 1750/1450 RPM
  • Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines)
  • Bore: .787″ (20mm)
  • Stroke: .394″ (10mm)
  • Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil)
  • Maximum Fluid Temperature: 165 degrees F.
  • Inlet Port Thread: 1/2″ FPT
  • Discharge Port Thread: 3/8″ FPT
  • Shaft Diameter: .945″ (24mm)
  • Dimensions: 9.3″ x 8.3″ x 5.4″
  • Weight: 18.7 lb.
  • Forged brass manifold with an exclusive lifetime warranty
  • Die cast, anodized aluminum oil bath crankcase
  • Solid ceramic plungers with continuously lubricated packings
  • The original InterPump unitized stainless steel Kit 1 inlet and outlet valves
  • Standard 24mm soid shaft for pulley mounting
  • Flex coupling and bell housing available for direct drive
  • Ideal for all general cleaning/washing applications
  • Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter
  • The following statement is intended to assist our customers in understanding the terms of General Pump’s warranty, the circumstances under which they will honor claims, and the procedure for making such claims.
  • General Pump/US warrants each pump to be free of defects in material or workmanship for a period of five (5) years from the date of shipment. In addition, Gernal Pump/US warrants allforged brass pump manifolds to be free of defects in material and workmanship and from damage resulting from freezing for the life of the pump. Liability on this warranty is on all non-wear parts and limited to the repair or replacement of any pump returned to General Pump/US which upon inpsection is judged to be defective due to workmanship or material failure.
  • In the course of marketing or servicing the customer or potential customer’s needs, General Pump/US will use its best judgment in its recommendations. However, the ultimate responsibility for product application decisions shall rest with the customer. the sole and only warranty made by General Pump/US is the limited warranty described above. General Pump/US makes no other warranty or warranties of any kind, express or implied, including any implied warranty or merchantability or of any fitness for a particular use or purpose.General Pump/US disclaims and denies any liability for any direct, indirect, special, incidental or consequential damages which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight or other charges not expressly included herein. the only liability and the total liability of General Pump/US under this limited warranty or in any claim regarding or involving General Pump/US is expressly limited to the replacement of or purchase price of the product.
  • The following items are NOT warranted, due to matters beyond General Pump/US control.
  • Normal wear and tear to parts that are considered standard wear parts.
  • Defects caused by the fault or negligence of the buyer or third party.
  • Use of unauthorized repair parts, or;
  • modifications made by the customer.

List Price: $585.02

Our Price: $450.17

You save $134.85!

Also

CLICK HERE TO REGISTER TO GRAFFITI REMOVERS MESSAGE BOARD

Equipment Trade Service Co. Inc.has been providing Industrial Pressure Washer Cleaning Machinery, Chemicals and Supplies to Government, Transportation, Manufacturing, Construction, Contractors and Home Owners.